Filter
Top Products
Chapter 6 Appendix — Technical information
ENGLISH - 165
Command Details
Parameter/response
string
Remark (parameter)
OPP P IN P execution
0 OFF
1 USER1
QPP P IN P setting query
2 USER2
3 USER3
OCS Sub memory switch
01 - 96 Sub memory number
QSB
Sub memory status
query
*1 Use from the lamp with shortest runtime among Lamp 1 to Lamp 4.
r Projector control command (with sub command)
Command Sub command Details Remark
VXX RYCI1 RGB1 input setting +00000 = RGB/YP
B
P
R
, +00001 = Y/C
r Lens control command
Command Sub command Details Remark
VXX LNSI2 Lens H shift
+00000 = Fine adjustment 1+, +00001 = Fine adjustment 1
-
, +00100
= Fine adjustment 2+, +00101 = Fine adjustment 2
-
, +00200 = Coarse
adjustment+, +00201 = Coarse adjustment
-
VXX LNSI3 Lens V shift
VXX LNSI4 Lens focus
VXX LNSI5 Lens zoom
<REMOTE 2 IN> terminal
It is possible to control the projector remotely (by external contact) from a control panel located away from the projector where remote control
signals cannot reach.
Use the <REMOTE 2 IN> terminal on the connecting terminals of the projector to connect to the control panel.
Remote control Contact control
Remote control/contact control
Standby Lit
Lamp
RGB1 VIDEO
RGB2 HDMI
DVI-D
Installation locations in meeting rooms, etc. Remote control board in another location