Filter
Top Products
7
About the LCD (Liquid Crystal Display)
After setting the Power Switch to ON, the following displays may appear.
The portable station is in the stand-by mode.
The date and time (day / month / time) are displayed on the top
line. You can select displaying the date only (day / month) in PS
Programming. (Selecting the Date / Time Display)
The number which is determined in PS Programming (e.g., your
extension number) can be displayed on the bottom line. (Selecting
the Standby Display; default – OFF)
Consult with your dealer.
The Call Forwarding feature has been set.
The Do Not Disturb (DND) feature has been set.
The key lock mode has been set to ON. To cancel the mode, press
(Function) for 2 seconds. (Refer to page 19.)
Your PS is not registered in the system.
Your PS is out of range.
1 JAN 11:00
FAULT
FWD
DND
KEYPAD LOCKED
PRESS F FOR 2SEC
REGISTER UNIT
NO SERVICE