Filter
Top Products
10
Initial Settings
Registering the PS
After charging the battery, you must register your PS in the system
and determine its’ extension number.
For registration, refer to System Program [650], “PS
Registration”, in Section 3 in the Installation Manual Addendum
for the KX-TD144/KX-TD142/KX-TD7500.
Selecting the Display Language
The default setting of the PS displaying language is “AUTO
(English)”. For example, to select the German display, see the
method below. If your PS is assigned to the Digital Super Hybrid
System while the default setting is still “AUTO”, the displaying
language will depend on the setting of the system.
Press (Function).
Press (Book) 2 times.
• You can also search by pressing
(Next) or (Previous).
Press (OK).
Press (OK).
Press (Next) or (Previous)
repeatedly until the display for the
Language Selection appears.
Press (Book) repeatedly until the
language you use is displayed.
Press (OK).
To exit the PS Programming mode,
press (Cancel).
C
OK
OK
OK
BACKLIGHT
= ON
1
2
3
LANGUAGE
= AUTO
4
5
6
7
8
LANGUAGE
= GERMAN
KEY
PROGRAMMING
PS-PROGRAM
Verzeichnissper.
= Aus