Filter
Top Products
13
Basic Operations
Making Calls
Intercom Calls
Press (Talk) or
(Intercom).
Enter the extension number.
• The dialed number is displayed.
• If you misdial, press (Flash) and
enter the number again.
Talk after the called party answers.
Press (Cancel) after the conversa-
tion is finished.
Note: – Predialing is also possible. In this case, reverse steps 1 and 2.
– If you misdial while predialing, press (Clear) to clear each digit
from the last one, and enter the number again.
– You can also finish the conversation by placing the PS on the Charger
or pressing (Talk).
– If “ ” flashes, move towards the Cell Station and try again.
CLR
C
INT'
Make sure the Power Switch is set to ON (●) and “ ” is displayed.
201
201
1
2
3
4
Handover: Even if you move during a conversation, the linking CS is automatically
switched without disconnecting the call.
Handover is available only during a conversation (except a conference call).
It is not available when the switched CS is busy or there is no CS in the
moving range.