Filter
Top Products
17
Basic Operations
Answering Calls
When you receive a call, the portable station (PS) rings or vibrates,
and the CO line number or extension number of the receiving call
appears on the display.
If the PS is not on the Charger
Press (Talk) or the flashing
(Flexible CO).
• The display starts counting the call
duration (or charge, if programmed).
To hang up, press (Cancel) or (Talk)
or place the PS on the Charger.
If the PS is on the Charger (Quick Answering)
Just lift up the PS.
• The display starts counting the call
duration (or charge, if programmed).
To hang up, press (Cancel) or (Talk)
or place the PS on the Charger.
Note: – Quick Answering is available only when the Quick Answering mode is
set to “ON”. Refer to “Setting the Quick Answering Mode” in PS
Programming.
If a headset is connected to the PS
You can select the answering mode by PS Programming as fol-
lows.
– OFF (default): Answers using normal operations.
(Refer to the operations above.)
– INT/CO: Automatically receives all incoming calls.
– INT ONLY: Automatically receives incoming intercom calls.
To select the automatic answer mode, refer to “Setting the
Automatic Answer Mode” in PS Programming.
C
C
F1-F3
Make sure the Power Switch is set to ON (●) and “ ” is displayed.
1
2
CO01 0:01’15
1
2
CO01 0:01’15