Filter
Top Products
14
Basic Operations
Outside Calls
There are three types of line access methods as follows:
1) Line Access, Automatic: selects an idle CO line.
2) Line Access, CO Line Group: selects an idle CO line in the
desired CO line group.
3) Line Access, Individual: selects a specific CO line.
Line Access, Automatic / CO line group
Press (Talk).
Enter the line access code.
– 9 : Automatic
– 81 through 88 : CO Line Group
Enter the phone number.
• The dialed number is displayed.
• The display starts counting the call
duration (or charge, if programmed).
• If you misdial, press (Flash) and
enter the number again.
Talk after the called party answers.
Press (Cancel) after the conver-
sation is finished.
Note: – Predialing is also possible. In this case, press (Talk) (step 1)
after entering the phone number (steps 2 and 3).
– You can also finish the conversation by placing the PS on the Charger
or pressing (Talk).
– If “ ” flashes, move towards the Cell Station and try again.
C
Make sure the Power Switch is set to ON (●) and “ ” is displayed.
01234567
CO01 0:01’15
1
2
3
4
5