Filter
Top Products
744T User Guide and Technical Information
48
firmware v. 1.04 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
# Setup Name Setup Description Setup Parameters
48
Output 2 L,R: Source
Selects the signal source for output bus 2
sent to digital output bus 2.
• inputs 1 / 2
• inputs 3 / 4
• tracks A / B
• tracks C / D
• monitor A / B (post-record monitor)
• monitor C / D (post-record monitor)
49
Output 2 L,R: Attenuation
Selects the attenuation level of the signal
output to bus 2.
selectable from 0 to -40 dBFS
50
Play: AutoPlay Mode
Allows user to play file(s) consecutively
from selected directory, one time through
or continuously.
Great for playing an MP3 collection
during down time!
• Disabled
• Play all
• Repeat one
• Repeat all
51
Time/Date: 12/24 Hr
Selects between 12 hour and 24 hour
time.
• 12 hr
• 24 hr
52
Time/Date: Date Format
Selects the date syntax of the recorder. • mm/dd/yyyy
• yyyy/dd/mm
53
Time/Date: Set
Sets the internal date and time of the
744T.
Resetting the time re-jams the inter-
nal time code generator to the set
time. Setting the internal clock during
a production day will require time
code devices to be re-jammed.
<time, date>
Clock is not set until <done> is selected
54
LCD: Contrast
Sets the contrast level of the LCD display.
In normal operation, should only need to
be set once
0–100%
55
Meter: Ballistics
Selects among five different meter bal-
listics settings
• VU only
• Peak only
• Peak-hold only
• Peak+VU
• Peak-hold + VU
56
Meter: Peak Threshold
User-set level in dBFS where track peak
LED’s illuminate. 0 LED doubles as track
peak indicator.
0 to −20 dBFS (1 dB increments)
57
Meter: Stealth Mode
Enables LEDs to toggle on and off with
the LCD backlight key.
• Off
• On
58
HP: Encoder Switch Function
Selects the functionality of the Multi-
Function Controller’s button when in
record and playback.
• Disabled:
push makes no change to the headphone
matrix.
• Selects Favorite Mode:
in record and playback modes, push will
change the headphone source immediately
to the favorite selected in HP: Favorite Mode.
• Headphones to C/D:
momentarily shows headphone level on
tracks C & D LED meters.
• Playback/Monitor Drive Select
Selects the media source for file playback
and record monitoring
59
HP: Monitor Modes
Select the sequence of the modes that
appear in the Headphone Source Display
on the LCD.
Up to 20 source selections can be entered, in
any order. See headphone monitor section in
guide for adjustment.