Filter
Top Products
Input-to-Track Routing
19
any combination of
the four inputs can
be routed to any of
the four tracks
Regardless of which tracks are assigned for recording, monophonic fi le numbering always starts with 1,
i.e., if only track D is selected for recording in a monophonic .WAV fi le, the resulting fi lename will have a
_1 suffi x, not _4. Polyphonic fi les will play back the recorded track starting from track A, i.e., if a poly fi le
is recorded on tracks B and D, playback will occur on tracks A and B.
Use the Input:Routing selection in the menu to enter input select mode. Alternatively, press the
input key to cycle through the six preset input routing combinations.
The last selection in the list is Custom Route. Press the EDIT soft key to enter custom routing mode.
Custom routing allows any input to be assigned to any record track. When assigning customer rout-
ing, active input and track combination are displayed in white text. The four inputs are shown on the
left; the four record tracks are shown on the right.
To assign custom input routing:
1. Press the input key until Input Routing is displayed in the LCD display.
arrow indicates high-
lighted input is assigned
to highlighted track
select to exit menu and
apply selected routing
select to remove
input assignment
selet to move up
and down menu
2. Press the EDIT soft button (
) and scroll to the appropriate input screen.
3. Using either the Multi-Function Controller or the up and down arrows, navigate to desired input-to-
track combinations.
4. When a chosen pairing is highlighted press either the ASSIGN soft key or the Multi-Function Controller
to assign the combination. Assigned tracks are noted on the screen by the addition of an arrow pointing
to the record track. The LED routing matrix will also show a fl ashing blue LED for the currently selected
input-to-track combination.
5. Once a track is assigned move to the next input-to-track combination desired.
6. To remove an input-to-track combination assignment, navigate that combination and press the
UNASSIGN soft key.
7. Exit and complete the assignment by pressing the check mark soft key.
The input routing menu will always exit to the main screen whether entered from the input key or the
menu selection.