Filter
Top Products
79
Advanced Setup—Continued
Changing the AV Receiver’s Remote ID
When several Onkyo components are used in the same
room, their remote ID codes may overlap. To differenti-
ate the AV receiver from the other components, you can
change its remote ID from 1, the default, to 2 or 3.
Note:
If you change the AV receiver’s remote ID, be sure to set
the remote controller to the same ID (see next column).
Note:
• This procedure can also be performed on the AV
receiver by using its [SETUP] button, arrow buttons
and [ENTER] button.
Changing the Remote Controller’s ID
To differentiate the remote controller from other Onkyo
components, you can change its remote ID so that it
matches the AV receiver’s Remote ID setting.
Note:
If you change the remote controller’s remote ID, be sure
to set the AV receiver to the same ID. Otherwise, you
won’t be able to control it (see previous column).
Remote IDs
1
Press the [RECEIVER] REMOTE
MODE button, followed by the
[SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [ ]/[ ]
buttons to select “8. Hardware
Setup,” and then press [ENTER].
The Hardware Setup menu appears.
10
--/---
11 12
REMOTE MODE
HDD
RECEIVER
TAPE/AMP
DVD CD
ZONE2
SAT
TV
VCR
CABLE
MDCDR
RANDOMREC PLAYLIST
+
-
T
V CH
T
V VOL
ENTER
S
E
T
U
P
T
O
P
M
E
N
U
M
E
N
U
VOL
+
-
CH
DISPLAY
PREV
CH
DIMMER
SLEEP
MUTING
INPUT SELECTOR
32
MACRO
1
+
10 0
CLEAR
12
3
456
789
INPUT
I
ON STANDBY
T
V
CD
V1 V2 V3
MULTI CH
DVD
TUNER
PHONO
DISC
ALBUM
V4
TAPE
R
E
T
U
R
N
SETUP
TV INPUT
RECEIVER
ENTER
Number
buttons
Remote
indicator
RECEIVER
ENTER
ENTER
3
Use the Up and Down [ ]/[ ]
buttons to select “Remote ID,”
and use the Left and Right
[ ]/[ ] buttons to select ID 1, 2,
or 3.
4
Press the [SETUP] button.
Setup closes.
1
Press and hold down the
[RECEIVER] REMOTE MODE but-
ton, and then press the TV
[INPUT] button.
The Remote indicator flashes four
times.
2
Use the number buttons to enter
remote control ID 1, 2, or 3.
The Remote indicator flashes twice.
ENTER
ENTER
8.Hardware Setup
------------------------
a.PoweredZone2:NotAct
b.TV Format :Auto
c.AM Freq. Step: 9kHz
d.Remote ID :1
d.Remote ID :1
RECEIVER
123
V1 V2 V3