Filter
Top Products
77
Advanced Setup—Continued
This section explains items on the “Preference” menu.
Note:
• This procedure can also be performed on the AV
receiver by using its [SETUP] button, arrow buttons,
and [ENTER] button.
IntelliVolume
With this preference, you can set the input level for each
input source. This is useful if some of your components
are louder or quieter than others. IntelliVolume does not
affect Zone 2.
Use the Up and Down [ ]/[ ] buttons to select an
input selector, and use the Left and Right [ ]/[ ] but-
tons to set the level.
If a component is too loud compared to your other com-
ponents, use the Left [ ] button to reduce its input level.
If it’s too quiet, use the Right [ ] button to increase its
input level. The level can be set from –12 dB to +12 dB.
Volume Setup
■ Volume Display
With this preference, you can choose how the volume
level is displayed.
Absolute: Display range is MIN, 1 through 99, MAX.
Relative: Display range is –∞ dB, –81 dB, –80 dB
through +18 dB.
The absolute value 82 is equivalent to the relative value
0 dB.
■ Muting Level
This preference determines how much the output is
muted when the Muting function is used (see page 58).
It can be set to –∞ dB (default) or between –50 dB and
–10 dB in 10 dB steps.
■ Maximum Vol
With this preference, you can prevent the volume being
set too high by specifying a maximum volume level.
When the “Volume Display” preference is set to “Abso-
lute,” the range is from 50 to 99. When it’s set to “Rela-
tive,” the range is –32 dB to +17 dB. To specify no
maximum volume, select “Off.”
Preferences
1
Press the [RECEIVER] REMOTE
MODE button, followed by the
[SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [ ]/[ ]
buttons to select “7. Preference,”
and then press [ENTER].
The Preference menu appears.
3
Use the Up and Down [ ]/[ ]
buttons to select a preference,
and then press [ENTER].
10
--/---
11 12
REMOTE MODE
HDD
RECEIVER
TAPE/AMP
DVD CD
ZONE2
SAT
TV
VCR
CABLE
MDCDR
RANDOMREC PLAYLIST
T
V VOL
ENTER
S
E
T
U
P
T
O
P
M
E
N
U
M
E
N
U
VOL
+
-
CH
DISPLAY
PREV
CH
DIMMER
SLEEP
MUTING
INPUT SELECTOR
32
MACRO
1
+
10 0
CLEAR
789
PHONO
DISC
ALBUM
R
E
T
U
R
N
SETUP
RECEIVER
ENTER
RECEIVER
ENTER
ENTER
7.Preference
------------------------
1.IntelliVolume
2.Volume Setup
3.OSD Setup
4.OSD Position
5.HDMI Setup
6.Lock Setup
ENTER
ENTER
4
Use the Up and Down [ ]/[ ]
buttons to select an option, and
use the Left and Right [ ]/[ ]
buttons to change it.
The preferences are explained in the
next column.
5
When you’ve finished, press the
[SETUP] button.
Setup closes.
ENTER