Onkyo SR804 Stereo Receiver User Manual


 
55
Listening to the Radio—Continued
Displaying XM Radio Information
Press the [DISPLAY] button repeatedly to cycle
through the available information.
The following information is displayed:
1. Channel name
2. Channel number & Preset number
3. Category name (CAT)
4. Artist name (NAME)
5. Song title (TITL)
6. Listening mode
Note:
If the category, artist, or song title is not available,
“- - -” will be displayed instead.
Displaying XM Radio Information on Your TV
When you select a different XM channel, or the artist or
song title changes, the following information is dis-
played on your TV for 3 seconds.
Tip:
You can display this information at anytime by pressing
the [DISPLAY] button.
XM Radio Messages
The following messages may appear while using XM
radio.
CHECK ANTENNA
The XM Mini-Tuner and Home Dock is not connected
properly. Check the connection.
UPDATING
The XM user encryption code is being updated. Please
wait.
NO SIGNAL
The signal is too weak. Check the XM Mini-Tuner
and/or antenna connection and reposition it for the best
reception.
LOADING
The main unit is tuning or decoding audio or text data.
Please wait.
OFF AIR
The XM channel you selected is not currently broadcast-
ing. Select another channel.
Positioning the XM Antenna
You can check the signal strength of the XM Radio sig-
nal and adjust the position of the XM antenna accord-
ingly.
Channel name
XM 050 5ch
CHANNEL: Channel name
CAT: Category name
NAME: Artist name
TITLE: Song title
1
Press the [RECEIVER] button,
followed by the [SETUP] button.
2
Use the Up and Down [ ]/[ ]
buttons to select “4. Input
Setup,” and then press [ENTER].
3
Use the Up and Down [ ]/[ ]
buttons to select “3. XM Antenna
Aiming,” and then press
[ENTER].
4
Adjust the position of the XM
antenna so that the Satellite sig-
nal strength bar is as long as
possible.
If you can’t receive a “Satellite” signal,
adjust your XM antenna so that the
“Terrestrial” signal strength bar is as
long as possible.
Terrestrial signals are only available in
certain areas. So long as the signal
strength is good, you can enjoy XM
Radio by using either satellite or terres-
trial reception.
Press the Down [ ] button to display
the “Terrestrial” signal strength bar on
the display.
5
When you’ve finished, press the
[SETUP] button.
Setup closes.
RECEIVER
ENTER
ENTER
4-3.Antenna Aiming
---------TUNER----------
a.Satellite
[
--------------------
]
b.Terrestrial
[
------------------------------
]