Filter
Top Products
43
◆ Group
The Group function enables you to assign tracks on
an MD to groups. This function is convenient when
you use MDLP for a disc that contains many tracks.
Notes
• You can group only consecutive tracks.
• You cannot assign a single track to multiple groups.
• If you try to play an MD that contains groups on a device
that does not support Groups, the disc name will not be
displayed correctly.
Do not edit an MD that contains groups on a device that
does not support Groups.
Group Set (while the source is MD and the
unit is stopped)
You can place tracks that do not belong to any group
into a new group.
Group In (while the source is MD and the unit
is stopped)
You can place tracks that do not belong to any group
into an existing group.
(Continued on the next page)
Using the MD Group Function
If 1TR, 1GR, MEM, or RDM is lit, you cannot use the edit functions. Place the unit in normal
playback mode.
1
Turn MULTI JOG to select the first
track you wish to assign to a new
group.
2
Press EDIT/CLEAR/NO and turn
MULTI JOG until “XX Tr Gr.Set?”
appears in the display.
3
Press MULTI JOG.
MULTI JOG
EDIT/CLEAR/NO
4
Turn MULTI JOG to select the last
track you wish to assign to a new
group.
5
Press MULTI JOG.
“Complete” appears, and the new group
is created.
1
Turn MULTI JOG to select a track
you wish to assign to a group.
2
Press EDIT/CLEAR/NO and turn
MULTI JOG until “XX Tr Gr.In?”
appears in the display.
3
Press MULTI JOG.
4
Turn MULTI JOG to select the
destination group.
5
Press MULTI JOG.
“Complete” appears, and the track is
placed as the last track of the selected
group.