Filter
Top Products
31
Recording CD to MD
(Synchro recording)
After you select songs, this function
enables you to edit and record the songs.
1
5
3
6
1
Insert a CD and an MD.
See Step 1 of “Playing a CD” on page 20.
See Step 1 of “Playing an MD” on page 22.
Use a recordable MD.
Tip!
If “MD Reading” appears on the
MD information display, you can-
not perform Synchro recording.
2
Check the necessary recording time.
Refer to Step 2 on page 27.
3
Press CD/MD repeatedly to display “CD.”
4
Select digital or analog recording.
See “Selecting digital or analog recording from CD to MD” on
page 37.
5
Press REC to set the FR-N3X in recording
standby mode.
Adjusting the recording level. See the next page.
Turning Level Sync on or
off
See “Numbering the songs —
Level Sync” on page 39.
6
Play the CD.
Numbering the desired song(s)
Press REC during recording of the desired song. If
you do not hold down REC long enough (about four
seconds or less), the song may not be numbered.
Dubbing another CD
Press CD to stop playback, and replace the CD with
another one. The MD recorder enters recording standby
mode.
When the end of the MD is reached, the recording auto-
matically stops.
Tip!
During recording, you can check
the elapsed time and remaining
time on the MD using DISPLAY.
Selecting a song after
pausing the CD
The MD also enters recording
stand-by mode.
Use / on the remote
controller or MULTI JOG on the
main unit to select a song on the
CD, then press CD or the
remote controller’s . The MD
resumes recording.
Checking the recording
result
See page 27.
CD
/