Filter
Top Products
37
◆ Selecting digital or analog recording from CD to MD (while the input source is
CD and the recorder is stopped
This operation is available for Synchro recording and Signal Synchro recording.
(Continued on the next page)
4
Turn MULTI JOG to select a recording mode from
the selection below in the following order.
SP: Normal stereo recording mode. You can record
stereo data of a length specified on the disc.
LP2: Normal stereo data is compressed to half its
length. The available recording time is twice the
length of “SP.”
LP4: Normal stereo data is compressed to a quarter
of its length. The available recording time is four
times the length of “SP.”
MONO: Monaural recording mode. The available record-
ing time is twice the length of “SP.”
Note
If you have recorded a disc in
LP2 or LP4 mode, you cannot
play it on a player that does not
support LP2 or LP4 mode. If you
play such a disc on another MD
player, “LP:” may appears in the
display as a title.
5
Press MULTI JOG when the desired recording
mode appears on the display.
1
Press EDIT/CLEAR/NO to display “Rec Signal?.”
Tip!
The “DIGITAL” indicator lights up
on the CD information display if
digital recording has been
selected. The indicator does not
light up if analog recording has
been selected.
2
Press MODE/YES.
3
If you do not wish to change the current setting, press EDIT/CLEAR/NO. If you wish
to change the setting, press MODE/YES.
When you press MODE/YES after the FR-N3X displays “Dig→Ana?,” it starts analog
recording.
When you press MODE/YES after the FR-N3X displays “Ana→Dig?,” it starts digital recording.
The FR-N3X displays “Complete.” You have now completed all settings.
When you eject the CD and press the CD-DUB button, the FR-N3X displays “Dig.”
“DIGITAL”
lights up dur-
ing digital
recording.
Current recording
option