Filter
Top Products
36
◆ An MD after recording
◆ Can’t dub?
• “Cannot Rec” appears on the display.
The current MD is for playback only. Use a recordable MD.
• “Protected” appears on the display.
The MD is write-protected. See “Precautions for handling the MiniDisc (MD)” on page 12.
• “Disc Full” appears on the display.
The MD has no space available for recording. Use a new MD.
• “CD Dub Fail” appears on the display.
The MD mechanism is still operating. Wait a while, then press CD DUBBING.
The CD is in RANDOM mode. Press MODE to cancel RANDOM mode.
◆ Selecting a recording mode (while the input source is MD and the recorder is
stopped)
Select Record mode before you start recording.
Settings for Recording (continued)
TOC indicator
Information, such as track numbers, is written into the table of contents (TOC) on the MD
before you eject the MD, before the recorder enters standby mode, or before recording is
stopped.
Do not disconnect or move the power cord under the following situations. Otherwise, the
data will not be written correctly. (Also, refer to the “When the power is down” section on the
right.)
• When the TOC indicator is lit
The information to be written into the TOC is currently stored in memory on the FR-N3X.
• When the TOC indicator is flashing
The information is being written to the MD.
When the power is down
If the power is down or if you dis-
connect the power cord acciden-
tally while the TOC indicator is lit
or flashing, the data recorded
prior to power down will be
erased.
When “Retry Error”
appears
Eject the MD, insert it again,
then try recording again.
The TOC indicator
flashes.
1
Press EDIT/CLEAR/NO.
2
Turn MULTI JOG to display “Rec Mode?”.
3
Press MULTI JOG.