Filter
Top Products
26
Timers
The CR-L5 has four timers that you can use to automatically
turn it on and off at certain times and on certain days of the
week, so you can listen to, or record your favorite programs.
Timers can be used to start and stop playback (Play), or to
start and stop radio or TV/LINE input recording (Rec) with
an Onkyo cassette tape deck connected via .
Timers can be set for one-off use (Once), in which case the
timer is reset once the task has been completed, for use on a
certain day every week (Every), or for a range of days (e.g.,
Monday through Friday).
■
Timer Examples
The following examples highlight some of the ways in
which you can use the timers.
Timer 1:
To wake up to your favorite radio station (preset
#1) every morning, set as follows:
PLAY
➔
FM 1
➔
EVERY
➔
EVERY DAY
➔
ON 7:00
➔
OFF
7:30
If you want a radio alarm only on weekdays, select “Days
Set” instead of “Everyday” and specify “MON–FRI.”
Timer 2:
To record a one-off radio program (preset #2) this
Sunday, set as follows:
REC
➔
FM 2
➔
ONCE
➔
SUN
➔
ON 21:00
➔
OFF 22:00
(You need an Onkyo cassette tape deck to do the recording.)
■
Timer Overlap
If two or more timers are set to the same ON time, the timer
with the lowest number has priority. For example, if Timer
#1 and Timer #2 are both set to an ON time of 7:00, Timer
#1 has priority and Timer #2 is ignored.
Timer 1:
07:00 - 13:00 (This timer has priority.)
Timer 2:
07:00 - 12:30
If the settings of two timers overlap, the earlier timer has
priority.
Timer 1:
9:00 - 10:00
Timer 2:
8:00 - 10:00 (This timer has priority.)
Notes:
• The timers work only if the CR-L5 is in Standby mode. If
the CR-L5 is on when a timer is supposed to start play-
back or recording, nothing will happen, so be sure to
switch the CR-L5 to Standby mode.
• While a timed playback or recording task is in progress,
you cannot set the clock or change the specified OFF
time.
• While a timed recording task is in progress, the output of
the CR-L5 is muted. To hear what’s being recorded, press
the [MUTING] button to cancel the Mute function. Press
it again to mute the CR-L5.
The timers are set using the remote controller.
You must set the clock (page 16) before you can set the tim-
ers.
To use a timer to turn on the radio, you must preset some
radio stations first (see page 22).
1
Press the [TIMER] button repeatedly
to select Timer #1, #2, #3, or #4, and
then press the [ENTER] button.
In this example, timer #1 has been selected.
2
Use the Up/Down [ ]/[ ] buttons to
select Play or Rec, and then press
[ENTER].
3
Use the Up/Down [ ]/[ ] buttons to
select the input source, and then
press [ENTER].
For timed playback you can select any input source.
For timed recording you can select AM, FM, or TV/
LINE.
In this example, CD has been selected.
About the Timers
Setting the Timers
ON STANDBY
ENTER
TONE
TIMER
DIRECT
SLEEP VOLUME
UP
DOWN
CLOCK CALL
MUTING
12
▼
▲
3
456
789
▲
▼
INPUT
10/0
>
10
ENTER
TIMER
STANDBY
OR