Filter
Top Products
12
Connecting -compatible Components
With (Remote Interactive) you can control your -
compatible Onkyo cassette tape deck or CD recorder with
the CR-L5’s remote controller, and use the following spe-
cial functions:
■
Auto Power On
When you turn on a component connected via while the
CR-L5 is in Standby, the CR-L5 automatically turns on and
selects that component as the input source.
This function doesn’t work if the CR-L5 is already on.
■
Direct Change
When you press the play button on a component connected
via , the CR-L5 automatically selects that component as
the input source.
■
Auto Power Off
When you set the CR-L5 to Standby, all components con-
nected via also enter Standby.
■
Controlling Other Components
Other components can be controlled with the supplied
remote controller (see “Remote Controller” on page 10).
■
CD Synchro Recording
A CD recorder or cassette tape deck connected via , and
set to record pause, will start recording automatically when
CD playback is started on the CR-L5.
■
Timer
The CR-L5’s timers can be used to automatically start play-
back or recording on a cassette tape deck or CD recorder
connected via (see “Timers” on page 26).
■
Sleep Timer
When you set the CR-L5’s sleep timer, the sleep timers on
components connected via are also set, so all compo-
nents switch off after the specified period.
To use , you need to connect the CR-L5’s connector
to an connector on the other component by using an
cable. An cable is supplied with each -compat-
ible Onkyo cassette tape deck and CD recorder.
Hookup Example:
Notes:
• Push the plugs in all the way to make a good connection.
• Use only cables for connections.
•To use
you must make an analog RCA/phono con-
nection between the CR-L5 and the other component
even if they are connected digitally.
• If a component has two connectors, you can connect
either one to the CR-L5. The other connector is for con-
necting additional -compatible components.
• Connect the CR-L5’s connector to only Onkyo com-
ponents. Connecting to other manufacturer’s components
may cause them to malfunction.
• Some Onkyo -compatible components may not sup-
port the special functions described above.
CD RECEIVER
MODEL NO. CR
-
L
5
R
L
R
L
N.
/ SPEAKER
N.
/ SPEAKER
SPEAKERS
A SPEAKERS
B
REMOTE
CONTROL
PREOUT
R
L
R
L
TV/LINE TAPE CDR
FM
75
ANTENNA
COAXIAL
OPTICAL
AUDIO
ANALOG
OUT OUT
SUB
WOOFER
IN IN IN
AUDI O
OUTPUT
DIGITAL
AM
CDR
OUT
IN
COAXIAL
OPTICAL
AUDIO
OUTPUT
DIGITAL
REMOTE
CONTROL
L
R
ANALOG
INPUT
L
R
ANALOG
OUTPUT
DIGITAL IN
OPTICAL
REMOTE
CONTROL
To use you
must make an
analog RCA/
phono connec-
tion between
the CR-L5 and
the other com-
ponent even if
they are con-
nected digitally.
cable
Onkyo CD recorder