Filter
Top Products
23
Using the Radio—
Continued
You can select previously stored presets as follows.
1
Use the INPUT [ ]/[ ] buttons, or the
remote controller’s INPUT [ ]/[ ] but-
tons to select AM or FM.
2
Use the PRESET [ ]/[ ] buttons, or
the remote controller’s [ ]/[ ] but-
tons to select a preset.
You can delete unwanted presets as follows.
1
Select the preset that you want to
delete.
See the previous section for information on selecting
presets.
In this example, preset #3 has been selected.
2
While holding down the [MEMORY]
button, press the [FM MODE] button.
The selected preset is deleted and its number disap-
pears from the display.
The Radio Data System (RDS) allows FM radio stations to
broadcast various information to RDS-compatible radios,
including the name of the radio station and information
about the program being broadcast. Many FM stations in
most European countries transmit RDS information.
The CR-L5 supports the following RDS information:
PS:
Program Service Name
When tuned into a station that transmits PS information, the
station’s name appears on the display.
RT:
Radio Text
When tuned into a station that transmits RT information,
any text messages received appear on the display.
When the CR-L5 is tuned into a station that’s transmitting
RDS information, the RDS indicator appears on the display.
To display the PS and RT information, press the [DISPLAY]
button repeatedly to select Frequency display, PS, or RT, as
shown.
When the CR-L5 receives RT information, “Waiting”
appears on the display first, and then the received text
scrolls across the display.
Selecting Presets
Deleting Presets
RDS (Radio Data System)
Frequency
PS (Program Service Name)
RT (Radio Text)