Filter
Top Products
SMART ANTENNA Development Kit Appendix B
SMART ANTENNA User Manual Rev 6 45
the base station. Remember, the computed position solutions are that of the GPS receiving SMART
ANTENNA phase center.
Figure 24: Differential GPS Setup
Reference Description Reference Description
1 User-supplied radio data link 7 FlexPak COM1 port to PC cable
2 User-supplied modem 8 FlexPak COM2 port to modem cable
3 User-supplied connector on 9 SMART multi-cable to power, PC and
open end of SMART multi-cable modem
4 FlexPak-SSII (base station) 10 FlexPak ANT port to antenna cable
5 SMART ANTENNA (rover station) 11 Adaptor to power source cable
6 L1 GPS antenna 12 User-supplied PC
B.2 StarView Software Installation
Once the receiver is connected to the PC and power supply, install the StarView software. The StarView CD is
supplied with the development kit, otherwise StarView is available on our website (see below).
To install StarView from CD:
1. Start up the PC.
2. Insert the StarView CD in the CD-ROM drive of the computer.
3. Install the StarView software by following the steps on the screen. If the Setup utility is not
automatically accessible when the CD is inserted, select Run from the Start menu and press the
Browse button to locate Setup.exe on the CD drive.
3
1
4
6
2
1
2
5
7
8
9
10
11
11
12
12