Filter
Top Products
16 SMART ANTENNA User Manual Rev 6
Chapter 2 Installation
Figure 7: Central Cable Mount
Figure 7 shows the SMART ANTENNA with its cable exiting from the central cable mount, see also
Figure 5, instead of using the connector shown in Figure 6 on Page 15.
Use the open-ended cable shown in Figure 8 to connect the SMART ANTENNA to auxiliary equipment. See
Table 2 on Page 17 for the available variations of this cable.
Figure 8: Open-Ended SMART ANTENNA Cable
The SMART ANTENNA RS-232 multi-connector cable is shown in Figure 9 on Page 17 and is for RS-232
models only. The receiver end of the cable connects to the 7-pin (shown in Figure 6 on Page 15) or 6-pin
receptacle of the RS-232 SMART ANTENNA. It provides up to three ends opposite the receiver end:
• +12 V DC automobile input power plug
• DB-9 socket connector to user-supplied PC
• open end for a user-supplied auxiliary connection
See Table 2 on Page 17 for the available variations of this cable.