Filter
Top Products
Installation Chapter 2
SMART ANTENNA User Manual Rev 6 17
Figure 9: Multi-Connector SMART ANTENNA Cable
Table 2: Cable Variations
CAUTION
When installing the cable, use a tie-wrap near the antenna to hold the weight of the cable so that the connector
is not stressed by the cable weight.
2.1.1.1 Magnetic Mount Adaptor
A magnetic mount adapter (part number 270-990146-890), see Figure 10 on Page 18 is available as an
accessory. Use this magnetic mount accessory to thread the antenna onto a mount and position on a flat surface
(for example, on top of a vehicle).
Part Number
Serial
Interface
Length (m)
Number of Pins
at Receiver End
Connectors at
Other End
217-601764-001 RS-422 5 12 None
217-601764-002 RS-422 30 12 None
217-601764-003 RS-422 15 12 None
217-601742-001 RS-232 5 7 None
217-601742-003 RS-232 5 7
DB-9 and a
+12 V DC adapter
217-601798-001 RS-232 5 6 None
217-601798-003 RS-232 5 6
DB-9 and a
+12 V DC adapter
217-601798-004 RS-232 15 6
DB-9 and a
+12 V DC adapter