Filter
Top Products
SMART ANTENNA User Manual Rev 6 13
Chapter 1 Introduction
The SMART ANTENNA, see Figure 1 below, is a rugged, self-contained GPS receiver and antenna designed
for harsh tracking environments. It accepts DGPS correction signals to further enhance accuracy. The SMART
ANTENNA provides position and velocity data for a variety of applications.
Features:
• 12-channel parallel “all in view” tracking
• L1 C/A code and carrier phase
• RTCM-104 differential corrections input
• -135 dBm minimum tracking sensitivity
• 1PPS output aligned to GPS time 200 ns (typical)
• Single +5 V power input
• Reverse polarity and SAE J1455 load dump protected
• 1 Hz position, velocity and time (PVT) output
Available Model Features
1
:
• Integrated carrier phase (CP) data (Message ID# 23, Measurement Block Data only works with
these models): 1 Hz or 5 Hz CP
• SBAS (for example WAAS and EGNOS) support
• 5 Hz PVT output
• Precise timing
• DGPS base station software
Figure 1: SMART ANTENNA
1. Refer to Appendix A of the SUPERSTAR II Firmware Reference Manual for models and their
capabilities.