Mitsubishi Electronics A956GOT Stereo Equalizer User Manual


 
8.2 System Configuration when EMC Directive is Applicable
8.2.5 About the cable used
8 - 8
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
PERFORMANCE
4
NAMES OF
THE PARTS AND
THEIR SETTINGS
5
ROUGH
PRE-OPERATION
PROCEDURE
6
HANDLING
7
MAINTENANCE AND
INSPECTION
8
EMC DIRECTIVE
(2) For A956WGOT
Be sure to use the communication boards/communication modules shown below with A956WGOT.
If communication modules/communication boards other than those shown below are used, they are
not applicable to the EMC directive.
Confirm the hardware version with the products rating plate.
(Products that the EMC directive applies to are marked with the CE mark logo.)
8.2.5 About the cable used
If making the GOT applicable to the EMC directive, be sure to use the cables shown below.
: EMC directive applicable
: EMC directive not applicable
To make applicable to the EMC directive, each cable (including user created cables)
must be manufactured.
Refer to section 8.3.2 for the cable manufacturing method.
Connection Format Communication board/module
Bus connection
A9GT-50WBUSS (Hardware version B or later)
A9GT-BUSSU (Hardware version B or later)
A9GT-BUS2SU (Hardware version B or later)
CPU Direct connection
RS-232C A9GT-50WRS2 (Hardware version B or later)
RS-422 A9GT-50WRS4 (Hardware version B or later)
Computer link connection
RS-232C A9GT-50WRS2 (Hardware version B or later)
RS-422 A9GT-50WRS4 (Hardware version B or later)
CC-Link connection A8GT-J61BT13 (Hardware version E or later)
Ethernet connection A9GT-J71E71-T (Hardware version C or later)
Connection format Cable EMC Directive
Bus connection
A/QnACPU
AC06/12/30/50B, AC12/30/50B-R,
A1SC07/12/30/50B, A1SC05/07/30/50NB,
A8GT-C12/30/50NB, A370C12/25B,
A9GT-J2C10B, A8GT-C100/200/300EXSS,
A8GT-C100/200/300BS, A8GT-C100/200/300EXSS-1
QCPU (Q mode) QC06/12/30/50/100B, A9GT-QC150/200/250/300/350BS
CPU direct con-
nection
RS-232C communication QC30R2
RS-422 communication AC30/100/300R4-25P
Computer link
connection
RS-232C communication User created cable
RS-422 communication AC30/100/300R4-25P, User created cable
CC-Link connection CC-Link dedicated cable
Ethernet connection Category 5 Twisted pair shielded cable
DATE
MADE IN JAPAN
US LISTED
80M1 IND.CONT.EQ.
GRAPHIC OPERATION TERMINAL
MODEL
POWER
IN 24VDC
MITSUBISHI ELECTRIC CORPORATION
BD992C189H02
C
A951GOT-SBD-M3
MAX 12W 0105 LP
Compliant standard marking is provided.
Hardware version
L P
PASSED