Filter
Top Products
6.8 Printer Interface Module
6.8.3 Printer types
6 - 25
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
PERFORMANCE
4
NAMES OF
THE PARTS AND
THEIR SETTINGS
5
ROUGH
PRE-OPERATION
PROCEDURE
6
HANDLING
7
MAINTENANCE AND
INSPECTION
8
EMC DIRECTIVE
6.8.3 Printer types
The printer usable is any of the printers having the following specifications (standard) whose operations have
been checked by Mitsubishi.
• ESC/P24-J84-compliant printer (ESC/P command-compatible, color-compatible)
• Hewlett Packard printers (PLC command compatible)
For the operation-confirmed models, refer to the separately available document "List of operation-confirmed
devices for GOT900 series" (Technical bulletin T10-0028).
When the document is necessary, please contact your local Mitsubishi representative.
If the printer used is not given in the document, it may not operate properly.
The above document can be viewed on the Mitsubishi Electric FA Network Service On World Wide, MEL-
FANSweb home page.
(MELFANSweb home page: http://wwwf2.MitsubishiElectric.co.jp/melfansweb/english/)
6.8.4 Connecting procedure
1) Plug the GOT side connector of the printer cable to the
parallel interface of the A9GT-50PRF.
2) Connect the A9GT-50PRF and printer by the printer cable.
A9GT-50PRF
MITSUBISHI
PARALLEL