Filter
Top Products
8.2 System Configuration when EMC Directive is Applicable
8.2.2 About modules applicable to the EMC directive
8 - 6
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
PERFORMANCE
4
NAMES OF
THE PARTS AND
THEIR SETTINGS
5
ROUGH
PRE-OPERATION
PROCEDURE
6
HANDLING
7
MAINTENANCE AND
INSPECTION
8
EMC DIRECTIVE
8.2.2 About modules applicable to the EMC directive
The following table lists the modules compliant with the EMC directive.
: Compliant with EMC directive : Not compliant with EMC directive
*1 Be aware that if using A950GOT after removing the control panel as described in item 6.1.4, it is not
applicable to the EMC directive.
If connecting to a PLC not from this company (MELSEC-Q series, MELSEC-QnA
series, MELSEC-A series), refer to the manual of the connected device (PLC,
microcomputer) for information about the applicability of the EMC directive
Item Type EMC Directive
A950GOT
(Built-in RS-422 communication interface)
A950GOT-TBD(-M3)
A950GOT-SBD(-M3)
A950GOT-SBD(-M3)-B
A950GOT-LBD(-M3)
A951GOT-Q
(Built-in bus communication interface for Q CPU (Q mode))
A951GOT-QTBD(-M3)
A951GOT-QSBD(-M3)
A951GOT-QSBD(-M3)-B
A951GOT-QLBD(-M3)
A951GOT
(Built-in bus communication interface for A/QnA/Motion controller CPU)
A951GOT-TBD(-M3)
A951GOT-SBD(-M3)
A951GOT-SBD(-M3)-B
A951GOT-LBD(-M3)
A953GOT
(Built-in RS-232C communication Interface)
A953GOT-TBD(-M3)
A953GOT-SBD(-M3)
A953GOT-SBD(-M3)-B
A953GOT-LBD(-M3)
A956GOT
(Built-in communication module Interface)
A956GOT-TBD(-M3)
A956GOT-SBD(-M3)
A956GOT-SBD(-M3)-B
A956GOT-LBD(-M3)
A956WGOT
(Built-in communication module Interface)
A956WGOT-TBD