Mitsubishi Electronics A956GOT Stereo Equalizer User Manual


 
3.2 Performance Specifications
3 - 7
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
PERFORMANCE
4
NAMES OF
THE PARTS AND
THEIR SETTINGS
5
ROUGH
PRE-OPERATION
PROCEDURE
6
HANDLING
7
MAINTENANCE AND
INSPECTION
8
EMC DIRECTIVE
(4) Display specifications
*1 If you run the monitor with A956WGOT, the screen may flicker depending on the type of object/shape fill pattern
used when creating images.
This is due to the specifications of the LCD panel and is not a malfunction.
Be sure to check the combination of the type of pattern and color on the machine before using.
For patterns likely to flicker and countermeasures against flickers, refer to the PDF manual stored in the used
drawing software.
*2 Depending on the display color combination, the visibility of the screen may be lower from certain viewpoints.
Before using, check the color combination with the machine installed in the usage environment.
By designating bright colors for the basic color types, you can decrease the chances of this phenomenon occurring.
*3 For A95*GOT-(Q)TBD(-M3), A95*GOT-(Q)SBD(-M3)-B and A956WGOT the backlight needs not be replaced, as
they include a backlight of increased life.
*4 When parts must be changed, consult your sales representative.
*5 The screen saving/back light OFF function of GOT is extended, thus reducing burning prevention of the display
panel and extending longevity of the back light.
*6 Bright dots (always lit) and dark dots (unlit) may appear on a liquid crystal display panel. It is impossible to
completely avoid this symptom, as the liquid crystal display comprises of a great number of display elements.
Please note that these dots appear due to its characteristic and are not caused by product defect.
*7 A screen created with GT Designer2 is displayed with reversing (white/black) on GOT.
The same display image as a screen created with GT Designer2 can be set for the display on GOT with [Setup] of
the utility.
When setting [Reverse display] to [Yes]: The display is the same as one created with GT Designer2.
When setting [Reverse display] to [No]: The reversed (white/black) display of a screen created with GT Designer2
is displayed.
For how to operate the utility, refer to the GOT-A900 Series Operating Manual (Extended Option Functions
Manual).
Item
Specifications
A950GOT-TBD(-M3)
A951GOT-QTBD(-M3)
A951GOT-TBD(-M3)
A953GOT-TBD(-M3)
A956GOT-TBD(-M3)
A950GOT-SBD(-M3)-B
A951GOT-QSBD(-M3)-B
A951GOT-SBD(-M3)-B
A953GOT-SBD(-M3)-B
A956GOT-SBD(-M3)-B
A950GOT-SBD(-M3)
A951GOT-QSBD(-M3)
A951GOT-SBD(-M3)
A953GOT-SBD(-M3)
A956GOT-SBD(-M3)
A950GOT-LBD(-M3)
A951GOT-QLBD(-M3)
A951GOT-LBD(-M3)
A953GOT-LBD(-M3)
A956GOT-LBD(-M3)
A956WGOT-TBD
*1, *2
Display
Type
High intensity TFT color
liquid crystal
High intensity STN color
liquid crystal
STN color liquid crystal
Monochrome liquid
crystal
High intensity
TFT color liquid
crystal
Screen size 6 type 7 type
Resolution
320 240 pixels 480 234 pixels
Display
size
115 (4.5) 86 (3.4) mm (inch)
155.52 (6.12)
87.75 (3.45) mm
(inch)
Display
color
256 colors 8 colors
2 monochrome colors
*7
256 colors
Intensity
350cd/m
2
350cd/m
2
110cd/m
2
200cd/m
2
300cd/m
2
(Intensity of liquid crystal only)
View angle
Left/Right: 65
Top: 65
Bottom: 40
Left/Right: 50
Top: 50
Bottom: 60°
Left/Right: 50
Top: 45
Bottom: 60
Left/Right: 30
Top: 20
Bottom: 30
Left/Right: 65
Top: 40
Bottom: 65
Backlight
Cold-cathode tube backlight
(Backlight OFF/Screen saving time settings are available.)
Life *4
Display *5
*6
50,000h (Operating ambient temperature: 25 )
Backlight *5
50,000h *3 75,000h *3 40,000h 50,000h *3
(Time period until the intensity becomes 50%, based on the assumption the
GOT operates at 25 .)
Replacement
backlight
--- A9GT-50LT ---