Filter
Top Products
Installing Multiple Carriers Model 117A4 Carrier Installation Instructions
Model 117A4 Carrier Installation Instructions
503-801-180
Issue 2 February 1999 37
3
Beginning with the first empty slot and working from left to right, insert a radio
module into each slot of the control carrier. Hook each radio module onto a
mounting rod. Slowly swing the radio module’s card edge into the card edge
connector on the back of the carrier.
Note:
Slot 6 of a Model 117A3 control carrier must always contain a radio
module to pass the synchronization signal to the next carrier.
A Model 117A4 carrier does not require Slot 6 to be filled.
4
When the card edge is fully seated, a snap lock on the bottom of the radio module
will engage.
5
Repeat Steps 3 and 4 for each expansion carrier, until each radio module is
inserted into a carrier.
Note:
Fill all six slots of the current carrier before inserting radio modules into
the next carrier.