Filter
Top Products
Model 117A4 Carrier Installation Instructions Installing Multiple Carriers
Model 117A4 Carrier Installation Instructions
503-801-18036 Issue 2 February 1999
5
The PASS and POWER LEDs on all radio modules should be lit and green. If a
radio module’s PASS LED is not lit:
a
Power down the carriers.
b
Unplug from the wall outlet the power cord/AC adapter of the radio module
that did not light.
c
Wait 15 seconds.
d
Plug in the radio module’s power cord again.
e
Repower the carriers again, following the proper left-to-right order.
6
If your LEDs match the pattern in the illustration in Step 2, you can feel confident
that the carriers are cabled correctly and that the installed radio modules are all
functional.
7
Now go on to "Installing the Remaining Radio Modules" (page 36).
Installing the Remaining Radio Modules
1
Power down the carriers.
2
Remove the plastic cap covering each radio module’s card edge before inserting
the radio modules into the carriers.
POWER
RADIO
PASS
Radio
Module
POWER
RADIO
PASS