Filter
Top Products
Installing Multiple Carriers Model 117A4 Carrier Installation Instructions
Model 117A4 Carrier Installation Instructions
503-801-180
Issue 2 February 1999 27
9
Insert each carrier’s power cord into its AC adapter.
If appropriate, you can wall-mount each AC adapter using its attached wall-
mounting bracket.
10
Plug each carrier’s power cord into one of the following power sources that is not
controlled by an on/off switch.
~
Surge-suppressor strip.
~
Properly grounded 3-prong wall outlets. (See “Wall outlets” in the following
chart for the order in which to power up the carriers.)