Filter
Top Products
Record Function
Record Function
The record function allows you to direct a source signal to a recording device such as an
audio cassette unit,VCR or DAT recorder.
NOTE:
For reasons of copyright protection, some DVDs incorporate a protection system that
prevents the recording of DVDs on to a VCR.
Making a recording
To set the source you want to record:
using the handset -
●
Press SHIFT, then press RECORD within two seconds.
●
Press the appropriate source key. For an auxiliary source, press AUX.
using the front panel -
●
Press RECORD.
●
Press or hold SOURCE + / SOURCE - until the desired source is shown on the front
panel display.
Record lock
The record lock is used to prevent the source you are recording being changed while a
recording is in progress.
To toggle between record lock on or off:
using the handset -
●
Press SHIFT, then hold RECORD within two seconds until the word LOCKED is
shown on the display (record lock ON), or is not shown on the display (record lock
OFF).
using the front panel -
●
Hold RECORD until the word LOCKED is shown on the display (record lock ON), or
is not shown on the display (record lock OFF).
RECORD
RECORD
SHIFT
Source keys
SOURCE –/ SOURCE +
43
English