Filter
Top Products
Setup Menus
DOLBY PRO LOGIC
For DVDs
OFF - Stereo tracks on a DVD will play
as stereo.
ON - Stereo tracks on a DVD can be
played as stereo or decoded to up
to 5 channels (depending on the
audio mode selected – see
Surround sound modes in Playing
Discs chapter).
AUTO - The unit will read the code
embedded on the DVD and
automatically choose the audio
format.
For other stereo sources
OFF - Stereo sources will always play as stereo.
ON or AUTO - Stereo sources can be played as stereo or decoded to up to 5
channels (depending on the audio mode selected – see Surround
sound modes in Playing Discs chapter).
DOLBY PRO LOGIC II MODE
(This menu is suitable for use if your CLASSIK Movie Di is
connected to front, centre and rear speakers.)
Dolby Pro Logic II creates five output channels from
any internal or auxiliary two-channel source, such as
an audio CD, stereo tuner signal or TV/VCR audio
signal.This is achieved using an advanced surround
decoder that extracts the spatial qualities of the
original recording/signal without adding any new
sounds.The CLASSIK Movie Di offers five
modes of Dolby Pro Logic II operation.
Dolby Pro Logic
This mode recreates the surround processing offered by original Dolby Pro Logic.
The DOLBY PRO LOGIC setting is suitable if the source material is not of the best quality
(for example, a worn VCR tape).
Music
As its name suggests, this mode is recommended when listening to music. If you select
MUSIC mode you can adjust certain Dolby Pro Logic II parameters in the DOLBY PRO
LOGIC II CONTROL menu (see below).
Movie
This mode is recommended for when watching DVDs.
Matrix
MATRIX mode can be used to enhance mono signals (e.g. AM radio broadcasts) by
making them seem “larger”.
LPCM OUT
If you are using an external decoder to process the
audio signal but the decoder does not support a 96K
sample rate, set to the 48K option.
DOLBY PRO LOGIC II CONTROL
If you have selected MUSIC in the DOLBY PRO LOGIC II MODE menu, then you are able
to enter the DOLBY PRO LOGIC II CONTROL menu. Highlighting DOLBY PRO LOGIC II
CONTROL and pressing ‘enter’ reveals the DOLBY PRO LOGIC II CONTROL screen.
Dimension
The DIMENSION control allows you to shift the
balance between the front and rear speakers. Positive
values move the sound towards the front, negative
values towards the rear. If a recording is too spacious
or strong from the surround speakers it can be shifted
“forward” to get a better balance. A stereo recording
can be shifted “backward” to make the sound more
enveloping.
20
English