Filter
Top Products
30
EnglishPlaying Discs
Repeat section
To repeat a specific section of a disc:
using the handset -
While the disc is playing, select the start of the section to repeat -
●
Press SHIFT, then press A-B (‘3’ key) within two seconds.
Continue playback until you reach the end of the section to repeat.
●
Press SHIFT, then A-B within two seconds.
When A-B has been pressed for the second time, the chosen section automatically
plays repeatedly.
To cancel repeat section mode and continue with normal playback:
●
Press SHIFT, then press A-B within two seconds.
TIP: (DVDs only)
For extra control over marking the start and end of a section to repeat, pause playback
before pressing SHIFT, A-B.
Shuffle program
Disc must be stopped before this function can be accessed.
To shuffle the order in which tracks are played:
using the handset -
●
Press SHIFT, then press SHUFFLE (‘5’ key) within two seconds.
The front panel display shows SHUFFLE.
●
Press / to start playback.
To cancel shuffle mode:
●
Press .
●
Press SHIFT, then press SHUFFLE within two seconds.
/
Intro program
Disc must be stopped before this function can be accessed.
To listen to the first ten seconds of each track in sequence:
using the handset -
●
Press SHIFT, then press INTRO (‘6’ key) within two seconds.
To cancel intro playback mode and continue with normal playback:
●
Press / twice.
Include program
This program mode allows you to select which tracks you wish to listen to from those
available on a disc.
Disc must be stopped before this function can be accessed.
To select which tracks are to be played:
using the handset -
1. Press SHIFT, then press INCLUDE (‘7’ key) within two seconds.
The front panel display shows P01:00 and INCLUDE.
2. Use the digit keys to enter the number of the desired track.
3. Press STORE to store the selection and to move to the next program step.
4. Repeat steps 2 and 3 for all tracks you wish to select.
5. Press / to store the program and start playback of the selected tracks.
To clear a stored program or cancel include program mode:
●
Press SHIFT, then press INCLUDE within two seconds.
NOTE:
Up to 99 program steps are allowed.