Filter
Top Products
Calibration Utility for MACINTOSH
2–33
Part No. 1H9659 September 1997
3. Click on the
Print
button.
You return to the Calibration Document window. The calibration test
print is printed on the specified printer.
4. Use the Linearity Reference Card to select a box number for each of
the six density ranges.
If all of the Visual Linearity numbers on the test print are box number 5,
the printer is already calibrated. You can close the Calibration Utility.
If the Visual Linearity numbers on the test print are not all box number 5,
you must recalibrate the printer. Go to step 5.
5. Click on the
Input
button.
The Input Test Print Values dialog box opens.