Kenwood MDX-G3 Stereo System User Manual


 
7
EN
Preparation
section
Main unit only
1
Press the POWER key to turn
power on.
2
Press and hold the MENU key
for more than 2 seconds.
3
Rotate the VOLUME/MULTI-CON-
TROL knob to select the figure of
hour.
12 o'clock of day is displayed as "PM
12:00" and 12 o'clock of night is dis-
played as "AM 12:00".
4
Press the SET key.
5
Rotate the VOLUME/MULTI-CON-
TROL knob to input the figure of
minute.
6
Press the SET key.
To check the time of day :
Press the 7STOP key while the unit is in
the STANDBY mode (page 71).
÷ After a power failure, when the power cord
is unplugged and plugged again or when the
STANDBY/TIMER indicator blinks in green,
the present time should be adjusted again.
÷ In step 6, accurate time adjustment is pos-
sible by pressing the SET key at the same
time as a time announcement indicating the
00 second of the minute.
APE T
7
STOP ,
1 35
2
,
46
ADJUST
ADJUST
ADJUST
ADJUST
Adjusting the present time
To use the timer function, it is required to
set the built-in clock of the unit to the cor-
rect time. The clock shows the time of day
in 12-hour system.
Example : Adjustment to AM 8:07