Kenwood MDX-G3 Stereo System User Manual


 
17
EN
Basic section
To tune a radio station using numeric keys :
Input the preset number of the desired station using the numeric keys on the remote.
Examples
Preset No. 23 : +10, +10, 3
Preset No. 40 : +10, +10, +10, +10, 0
Receiving non-preset broadcast stations
A radio station can be tuned either by auto tuning or manual tuning according to the current
reception condition.
(1) Press the 7STOP/TUNING MODE key on the main unit (or the AUTO/MANU key on
the remote) to select "AUTO" or "MANUAL".
"AUTO" : Select this mode when the reception of radio stations is in a good condition.
"MANUAL" : Select this mode when the reception of radio stations is interfered with
noise.
÷ Usually leave "AUTO" lit (auto tuning mode, stereo reception).
(2) While "AUTO" or "MANUAL" indicator is lit, press the 4 or ¢ key on the main unit
(or the 1 TUNING DOWN or ¡ TUNING UP key on the remote) to receive the
desired station.
Auto tuning : Each press of the key tunes the next station automatically.
Manual tuning : Press and hold the key until the next station is tuned.
÷ When the unit is in the STANDBY mode (page 71), simply pressing the TUNER FM/AM key (or the
FM/AM key on the remote) turns the power ON and starts radio play. (One-touch operation)
÷ During tuning, pressing and holding the 4 or ¢ key on the main unit (or the 1 TUNING
DOWN or ¡ TUNING UP key on the remote) makes it possible to skip undesired stations that
may be received before the target station.
"TUNED" is lit when a station is received
"STEREO" is lit when a stereo station is received
"AUTO" is lit in auto tuning mode
Frequency display
STEREO
EX. BASS
TUNER