Kenwood MDX-G3 Stereo System User Manual


 
49
EN
Application
section
MD edit
4
Press the
4
or
¢
key repeat-
edly to select the latter track
number that you want to combine
with the track selected above,
and press the SET key.
5
Press the ENTER key.
6
Press the
0
EJECT key on the
main unit to eject the MD.
"MD WRITING" is displayed.
To cancel the COMBINE operation in the
middle :
Press the TRACK EDIT key any time before
the end of step 4.
Editing can be canceled provided that it is
attempted before "MD WRITING" is dis-
played. For the procedure, see "Canceling
editing" (page 53).
÷ Be careful not to turn power off or apply
shock or vibrations to the system while "MD
WRITING" is displayed.
÷ Tracks recorded using different recording
modes (pages 32&33) cannot be combined.
Combination of tracks may also be inhibited
by certain restrictions imposed by the MD
standard.
÷ When the tracks are combined, the MD re-
corder enters pause mode at the beginning
of the track created by combining.
Display when combining track Nos. 4 and 5
Combining tracks
Use the following procedure to combine two
track into a single track. The track numbers
after the combined tracks are adjusted au-
tomatically.
Image of combining tracks
Remote control unit only
1
Select the MD input and load a
prerecorded MD.
2
Press the
4
or
¢
key repeat-
edly to select the earlier track
number to be combined.
The track will be played back.
3
Press the TRACK EDIT key repeat-
edly until "
3
COMBINE?" is dis-
played, then press the SET key.
1
1
2
3
8
TUV
0
QZ
9
WXY
10
7
PRS
7
TRACK EDIT
REPEAT
TAPE
TAPE EQ.
VOLUME
ENTER
PGM
CLEAR/DELETE
MUTE
CHARAC.
SPACE
MDSTOP
MD O.T.E.
AUTO/MANU
TUNING
DOWN
TUNING
UP
TAPE O.T.E.
DISPLAY
TIME DISPLAY
P.CALL
SET
SOUND TONE TIMER
RANDOM
SLEEP
FM/AMCD
ENTER
SET
4
MD
6
¢
TRACK
EDIT
OMBINE ?C
EX. BASS
CBA ED F
BA FE
1
2
345
1
23456
C+D
EX. BASS
004+005 ?
Track No. selected in step2