Filter
Top Products
50
EN
The audio of the 2 seconds around it
will be played repeatedly.
Adjust while listening to the repeated
audio.
The dividing point can be adjusted in
the range between -31 and +31.
If you want to divide the track at an-
other point, cancel the DIVIDE opera-
tion then restart the procedure from
step 1.
6
Press the ENTER key.
7
Press the
0
EJECT key on the
main unit to eject the MD.
"MD WRITING" is displayed.
To cancel the DIVIDE operation in the mid-
dle :
Press the TRACK EDIT key any time before
the end of step 5.
Editing can be canceled provided that it is
attempted before "MD WRITING" is dis-
played. For the procedure, see "Canceling
editing" (page 53).
÷ Be careful not to turn power off or apply
shock or vibrations to the system while "MD
WRITING" is displayed.
÷ The track created by division does not con-
tain no-sound section between them.
÷ Division of a track may be inhibited by cer-
tain restrictions imposed by the MD stand-
ard.
÷ When the track is divided, the MD recorder
enters pause mode at the beginning of the
track with the earlier track number.
EX. BASS
PREV 0s 8
+
Dividing a track
Use the following procedure to divide a track
into two. The track numbers are adjusted
automatically.
Image of dividing a track
Remote control unit only
1
Select the MD input and load a
prerecorded MD.
2
Press the
4
or
¢
key repeat-
edly to select the track number to
be divided.
The track will be played back.
3
Find divided point, press the
TRACK EDIT key repeatedly until
"
3
DIVIDE?" is displayed, then
press the SET key.
4
Press the SET key again.
5
Press the
4
or
¢
key repeat-
edly to adjust the point where you
want to divide the track, then
press the SET key.
The dividing point
Point display
CBA DC' E
CBA ED
1
2
345
1
23456
1
1
2
3
8
TUV
0
QZ
9
WXY
10
7
PRS
7
TRACK
EDIT
REPEAT
TAPE
TAPE EQ.
ENTER
PGM
CLEAR/DELETE
CHARAC.
SPACE
MDSTOP
MD OT E
AUTO/MANU
TUNING
DOWN
TUNING
UP
TAPE OT E
DISPLAY
TIME DISPLAY
P.CALL
SET
RANDOM
FM/AMCD
ENTER
SET
4
MD
6
¢
TRACK
EDIT
IVIDE ?D
EX. BASS