Kenwood MDX-G3 Stereo System User Manual


 
43
EN
Application
section
MD edit
Changing a title
(1) Perform steps 1 to 4 of "Assigning a
title to a disc or track" (page 42).
(2) Press the 1 or ¡ key repeatedly
to select the character to be changed.
(3) Press the CLEAR/DELETE key to clear
the character to be changed.
(4) Perform steps 5 to 0 of "Assigning a
title to a disc or track" (page 42).
Deleting a title
(1) Perform steps 1 to 4 of "Assigning a
title to a disc or track" (page 42).
(2) Press the CLEAR/DELETE key to de-
lete the title characters.
All of the titles can be deleted at once
by selecting "ALL ERASE" in step 3
of "Assigning a title to a disc or track"
(page 42).
÷ Be careful not to turn power off or apply
shock or vibrations to the system while "MD
WRITING" is displayed.
÷ If the character to be changed is not dis-
played, press the 1 or ¡ key to move
the cursor and display the previously hidden
characters.
÷ If you want to input a track title while listen-
ing to it, play the track to be titled before
performing step 2 in "Assigning a title to a
disc or track" (page 42).
÷ The number of characters that can be input
is 1792 characters per disc or 80 characters
per track title (including "LP:").
To cancel title input in the middle :
Press the TITLE INPUT key any time be-
fore the end of step 7. Editing can also be
canceled provided that it is attempted be-
fore "MD WRITING" is displayed. For the
procedure, see "Canceling editing" (page 53).
Character input using the
4
and
¢
keys
(1) Perform steps 1 to 4 of "Assigning a
title to a disc or track" (page 42).
(2) Press the 4 or ¢ key.
(3) Press the CHARAC. key repeatedly to
select a character group.
Uppercase alphabet group : ABCD...
Lowercase alphabet group : abcd...
Numeral and symbol group: 0123...
For the characters that can be used
in titles, see "Title editing character list"
(page 46).
(4) Press the 4 or ¢ key repeatedly
to select the desired character.
(5) Press the SET key to enter the se-
lected character in memory.
Input the desired title by repeating
steps (3) to (5) for each character.
Pressing the CLEAR/DELETE key
clears the character located immedi-
ately before the cursor.
(6) Perform steps 8 to 0 of "Assigning a
title to a disc or track" (page 42).
≤ BCDA
Continued on next page
\
character group