Kenwood MDX-G3 Stereo System User Manual


 
33
EN
Application
section
Recording
4
Press the SET key.
The setting operation is complete if you
selected "STEREO" or "MONO" in the
above.
If you selected "LP2" or "LP4", the
stamping setting screen will be dis-
played. In this case, go to step 5.
5
Rotate the VOLUME/MULTI-CON-
TROL knob to select "LP:STAMP
on" or "LP:STAMP off", then press
the SET key.
Select "on" when you want to display
"LP:" at the beginning of the track title.
Select "off" is you do not want to dis-
play it.
Main unit only
1
Press the MENU key.
2
Rotate the VOLUME/MULTI-CON-
TROL knob so that "MD REC
MODE" is displayed, then press
the SET key.
The currently set recording mode is
indicated.
3
Rotate the VOLUME/MULTI-CON-
TROL knob so that the desired re-
cording mode is displayed.
"STEREO : Stereo recording mode
(no indicator lit)
"LP2" : Stereo LP2 mode
("LP2" lit)
"LP4" : Stereo LP4 mode
("LP4" lit)
"MONO" : Monaural LP mode
("MONO" lit)
APE T
VOLUME/
MULTI-CONTROL
SET
MENU
EX. BASS
MD REC MODE
2
EX. BASS
LP2
Setting the recording mode
The MD recording mode can be set only in
stop mode.
"LP2" lit
EX. BASS
LP:STAMP on
Display when "LP:STAMP on" is selected
Display when LP2 is selected