Filter
Top Products
Preparations
8
KR-V999D (En/T)
Operations
Other
Connecting the antennas
Make connections as shown below.
Do not connect the power cord to a wall outlet until all connections are completed.
Setting up the system
Antenna terminal connections
1 Push lever.
2 Insert cord.
3 Return lever.
FM indoor antenna
The supplied indoor antenna is for temporary use only. For stable
signal reception we recommend using an outdoor antenna.
Disconnect the indoor antenna when you connect one outdoors.
FM outdoor antenna
Lead the 75Ω coaxial cable connected to the FM outdoor
antenna into the room and connect it to the FM 75Ω terminal.
AM loop antenna
The supplied loop antenna is for use indoors. Place it as far as
possible from the receiver, TV set, speaker cords and power
cord, and adjust the direction for best reception.
FM75Ω
GND
AM
ANTENNA
AM loop antenna
FM indoor antenna
FM outdoor antenna
5 4 3 (mm)
75
300
Ω
Ω
75
Ω
1 Arrange the coaxial cable as illus-
trated.
2 Open the antenna adaptor.
Open the claws with the fingers to
release the lock and pull out the
cover.
4 Insert into the slit on
the clip. Fasten the
bands A and B,using
a pair of pliers.
5 Close the cover and con-
nect the adaptor to the
antenna terminal.
Claw
Pole A
Pole B
Band A
Band B
1 Loosen screw.
2 Insert antenna cable
3 Tighten screw.
4 Plug securely into 75 Ω terminal.
5 Find the position that provides best reception.
6 Fix both ends.
75
Ω
coaxial cable connection
3 Remove the inner conductor from
the groove of pole A and insert it in
the groove of pole B.
RG-6(5C-2V) or RG-59(3C-2V)