Kenwood KR-V999D Stereo Receiver User Manual


 
33
KR-V999D (En/T)
Operations
Listening to radio broadcasts
4
Wait for the information you selected while
listening to the current station.
The receiver will wait for the desired information to
start as long as the tuner is set to a preset RDS station
that displays both the "EON" and "RDS" indicators,
and the power is turned ON.
When listening to the tuner:
Be sure to stay tuned to stations that display both the “EON” and “RDS”
indicators.
To listen sources other than the tuner:
1Tune in a station which that displays both the “EON” and “RDS”
indicators, then use the INPUT SELECTOR to switch the input to the
source you desire.
2Even when the INPUT SELECTOR is set to a source other than tuner,
it will automatically switch to tuner when the desired EON program
starts to broadcast. During this period, the source selected in step 1
continues playing, but will not be heard.
3When reception of the desired EON program is complete, the INPUT
SELECTOR returns to the previous input source.
•When the power is OFF, the EON function does not operate.
• If a reserved EON program starts to broadcast during analog recording,
the INPUT SELECTOR switches to the tuner and the station broadcast-
ing the EON program is recorded.
TP (Traffic Program) indication
When the “TP” indicator is lit, this means that the presently-received
station or a station in the same network is transmitting traffic
information. When “TP” is displayed for the station being received,
the traffic information of this station can be received without EON
reservation.
When waiting for information while
listening to a RDS station without the EON
function
To cancel EON reservation
Turn the “TA”, “NEWS” and “INFO.”
indicators off.
TA/NEWS/INFO.
Each press switches the reservation mode as follows:
1 TA (Traffic Announcement)
2 NEWS (News)
3 INFO. (Information)
4 off (EON off)
Should be off
TA
A
BBC 2 F M
FM
A
RDS
INFO.NEWS
EON
SP.
ROOM
If the “EON” indicator does not light in steps 3 and 4 and the desired
kind of information has already been selected, the information from
only the station being received will be waited for.