Filter
Top Products
47
KR-V999D (En/T)
Remote Control
Controlling the sound in another room (ROOM B)
If you make connections to another room, you can use the
remote control to select source components and to adjujst
the volume (etc.) output to the other room. %
*KENWOOD system control operations are only possible when the
remote control is set to the Room A operation mode. In order to avoid
malfunctions, do not make system control connections to audio com-
ponents which you plan on controlling with the Room B operations
described below.
Getting the most from your remote control
AUDIO
SHIFTMACRO
TVVIDEO
GUIDEREC
MUTE
VOLUMETUNING/SKIP
THEME FAVMENU
FUNCTION
SHIFT
SETUP
INFO ALT AUDTV/SAT/VID
REPEAT RANDOM+100
DISPLAY ROOM BROOM A
ENT+10
LISTEN
MODE
SOUNDSUBWOOFER
564
231
897
0
8
7
4¢
6
BAND
P. CALL P. CALL
POWER
Keys or controls used in this operation.
SPEAKERSA
B
1
Select a speaker system.
*Audio and video signals are output from the SECOND ROOM PRE
OUT jacks regardless of the setting of the SP. A/B and ROOM A/
B indicators.
A ON :Select to output sound to ROOM A from the speaker
connected to the SPEAKERS A terminals. This set-
ting allows you to enjoy surround playback in ROOM
A while outputting sound to ROOM B via the SEC-
OND ROOM PRE OUT jacks.
B ON :Select to output sound to ROOM B via the speakers
connected to the SPEAKERS B terminals. Be sure to
turn off the subwoofer in ROOM A if one is con-
nected.
A+B ON : Select to output sound to ROOM A from the speakers
connected to the SPEAKERS A terminals and output
sound to ROOM B from the speakers connected to
the SPEAKERS B terminals.
ROOM A automatically switches to stereo playback
(surround playback is not possible).
A+B OFF : No sound from the speakers. Use this setting when
listening with headphones in ROOM A for stereo
sound in all playback modes or to listen in ROOM B via
the SECOND ROOM PRE OUT jacks.
2
Set the remote control to the ROOM B
operation mode.
Press the FUNCTION SHIFT key
and then press the ENT (ROOM
B) key within 3 seconds.
FUNCTION
SHIFT
\
ROOM B
ENT
3
Press the VIDEO or AUDIO key
repeatedly to set the ROOM B
input selector to the component
you desire.
Select the desired component.
4
Execute the desired operations.
A
SP.
A-PHONO
B
A
B
ROOM
The indicator for the speakers and room you want to use
should be lit.*
A
SP.
B-CD
B
A
B
ROOM
ROOM B input selector
• The setting of the ROOM B input selector also appears in the on screen
display.
•The component selected for ROOM B can also be operated using the
keys on the remote control. See "Remote operation of other compo-
nents" for a list of keys available with each component. P
The remote remains in the ROOM B operation mode until
you switch back to the ROOM A operation mode.
To return to the ROOM A operation mode, press the FUNCTION
SHIFT key and then press the +10 (ROOM A) key within 3
seconds.
•The MUTE and VOLUME +/– keys let you control the sound level in
ROOM B.
AUDIO
TVVIDEO
Only sources connected to the analog AUDIO (L and R)
and VIDEO jacks can be output to ROOM B.