Filter
Top Products
23
KR-V999D (En/T)
Operations
1 Select the source you want to record.
2 Set the cassette deck to record.
3 Start playback, then start recording.
Recording a music source
Dubbing tapes (TAPE 1
=
TAPE 2)
1 Set the INPUT SELECTOR to TAPE 1.
2 Start playback from TAPE 1, then start recording on TAPE 2.
1 Press TAPE 2 MONITOR.
2 Set the input selector to a source other
than TAPE 1.
3 Start playback from TAPE 2, then start
recording on TAPE 1.
Dubbing tapes (TAPE 2
=
TAPE 1)
Recording audio
Recording
INPUT SELECTOR
INPUT SELECTOR
TAPE2 MONITOR
Keys or controls used in this operation.
•When copying with a double cassette deck, refer to the operating
instructions supplied with the deck.
PHONES
BASS
FLAT
TREBLE
FLAT
1234567890
2-CH
DOWNMIXSTANDBY
LEVEL
INDICATOR
DIRECT MEMORY
AUTO BAND
TUNING
SPEAKERSA
B
DOLBY
DIGITAL PRO LOGIC
3 STEREO STEREO
SOURCE DIRECT DSP
DIMMER
MUTETAPE 2 MONITOR
INPUT SELECTOR VOLUME CONTROL
S−VIDEO VIDEO
AUDIO−VIDEO SURROUND RECEIVER KR-V999D
−10 +10 −10 +10
ON/STANDBY
DOWN UP
AV AUX
L
-
AUDIO
-
R
LOUDNESS
TA/NEWS/INFO.
PTY DISPLAY
+10/
PTY SEARCH
AUDIO
SHIFTMACRO
TVVIDEO
GUIDEREC
MUTE
VOLUMETUNING/SKIP
THEME FAVMENU
FUNCTION
SHIFT
SETUP
INFO ALT AUDTV/SAT/VID
REPEAT RANDOM+100
DISPLAY ROOM BROOM A
ENT+10
LISTEN
MODE
SOUNDSUBWOOFER
564
231
897
0
8
7
4¢
6
BAND
P. CALL P. CALL
POWER
-ON–OFF
TRAITR
thermally reactive advanced instantaneous transistor
POWER
AC-3
TAPE 2
• To record a digital source, connected to the VIDEO 2, 3, or 4 jacks, turn
the INPUT SELECTOR to select the appropriate component, then
press the STEREO key.
When making a digital recording, operations other than volume adjust-
ment may cause the sound to clip during recording.
Select a source other than TAPE 1
TAPE 2 MONITOR function
You can connect either a cassette deck or a graphic equalizer to the receiver's TAPE 2 jacks. If you connect a graphic equalizer, the TAPE
2 MONITOR key should be turned ON. If you connect a 3-head cassette deck, you can compare the source sound to the sound being
recorded while recording. Press the TAPE 2 MONITOR key to switch between the recorded sound to the source sound. For further
details, refer to the operating instructions supplied with the component you connected.
The TAPE 2 MONITOR function cannot be used when making digital recordings.
Lights