Filter
Top Products
Preparations
16
KR-V999D (En/T)
Operations
Other
Preparing the remote control
Setting up the system
Loading the batteries
•Insert four AAA-size (LR03) batteries as indicated by the polarity markings.
3 Close the cover.
2 Insert the batteries.
1 Remove the cover.
Operating distance
This remote control has two IR emitters: one to send commands
in a straight line over long distances, allowing you to control the
receiver and your other components from farther away; and one
for wide dispersion of commands in a closer proximity, for near-
field operation even when the remote control is not pointed
directly at the respective component.
Remote sensor
30˚ 30˚
Model: RC-R0905
Infrared ray system
1. The supplied batteries may have shorter lives than ordinary batteries due to use during operation checks.
2. Replace all four batteries with new ones when you notice a shortening of the distance from which the remote control will operate or if the
remote control blinks 5 times when you push a key. The remote control is designed to retain set up codes in memory while you change
batteries.
3. Placing the remote sensor in direct sunlight, or in direct light from a high frequency fluorescent lamp may cause a malfunction.
In such a case, change the location of the system installation to prevent malfunction.
Notes
Notes
6 m
10 m