Filter
Top Products
VR-2L_90/VR 2OeO/KRF-VeeB10iKRF-V7771 D IEn!K)
The control in "Room B" is possible when the analog inputs are used.
Preparation
The following preparatory setups are required to control the
audio in "Room B",
• Perform the operations described in "Connections for remote
control of other components" and "Setup for multi-room op-
eration",
• For the connect on to the speaker termina s or "PREOUT" jacks,
see "Making connections to another room (Room B}"
I Generai operation flow
n Selecting the speakers
F3 Selecting the "RoomA" or "Room B" control mode
Selecting the component to be controlled
[] Controllingthe component
r_ select the speakers.
When speakers are used:
O - oA O A ON r Listening in "Room A"
SPEAKERS _ B ON : Listening in "Room B"
- o B O A + B ON : Listening in both "Room A"
and "Room B"
O A ÷ B OFF : Muting all speakers
When SECONDROOM PREOUTare used:
• When SECOND ROOM PREOUT jack is used, sound o Jtput from
"Room B" speaker
_ Select the "Room A" or "Room B" control mode.
Operation for displaying the "Setup Multi Room" menu screen
shown on the left :
O Select the "Main Menu" icon.
Select the "Stp" icon,
_) Select the "Multi Room" icon.
Operation in the "Setup Mufti Room" menu screen :
_) Select and set the "Multi Room" icon to "Yes".
O Select and set the "Zone Select" icon to "Room A" or
"Room B" according to your current location.
Operation of main unit keys :
O Press and hold the DISPLAY MODE key for more than 2
seconds to set the IR RECEIVER setup to "IR RECEIVER B".
_ Select the component to be controlled.
• The icons that can be selected may be restr cted depending on the
model and setup
Select the control operation.
• Select the desired icon from the Centre! menu screen.
• Unless the IR OUT FOR REMOTE (to be released n the future) is
connected, the main unit stat_s cannot be displayed on the RC unit
during control in "Room B",
• While "Multi Room" is set to "Yes", part of the system control
operation, which is a "SL16" function, is net available,
I Display on the receiver main unit
The main unit displays the name of the component selected for "Room A".
Example: During playback of the CD player in "Room A" and the tuner in "Room B"_,
The main unit displays the CD input.
L .......