Kenwood KRF-V8881 D Stereo Receiver User Manual


 
Settin up the RCaccordinq to yourreceiver
Perform the following procedure after inserting batteries for
the first time or when the remote control back-up data has
been lost.
Preparations
Press the POWER key and ON/STANDBY key of the main unit to
t._m it ON, Wth some models sold in certain areas, simply pressing
the ON/STANDBY key turns the unit ON
Low battery alarm
When the alarm message
appears to indicate that the
remaining power is low, re-
place all the batteries with
new ones.
Model TypeSetup
D Loading batteries
O Remove the cover.
i_ Insert batteries. _1 Close the cover.
Insert four AA-s ze (R6/UM-3) batteries as indi
cared by the po arity marking.
To maintain [be memory of the settings you
made before, compete the batter,i replacemeet
operation within 30 seconds.
_'_ Check the display.
The "Model Type Setup" screen
appearS,
tf the remote cor_trol backup data is stored when
the batteries are replaced, the "Model Type
Setup" menu screen Js not displayed, in this
case, operations ir_ I_ I_1,L_ are not necessary
_l Move the cursor to the Model type icon matching the receiver.
O Identify the model type.
(use the table on the right).
O Move the cursor,
it can be moved in 4 directions, depending
on how you select the icon.
Main unit Remote:
(RECEIVER): "Model Type Setup"
Model name icon
VR-2090 ....................................................... MODEL 1
t VR-2080, KRF-V7771D (U.S.Military) ...... MODEL 2
('f_l._ KRF-V8881D,
4=
The icon on which the cursor is moved KRF-V7771D {Except for U.S,Military) .... MODEL 3
4 blinks in reverse video.
_ Enter the selection.
I ,___._,, Press the ENTER key. e After selecting an con, always be sure to press the ENTER key to
enter the selectioi_
O Open the cover and remove batteries.
Q Press the reset button with the tip of a thin object for a few
seconds.
Use the same procedure also to reset the remote control unit fin
case it malfunctions, etc)
This operation clears atl of the previously set up data