Kenwood KRF-V8881 D Stereo Receiver User Manual


 
..m ,nllllll i i iiiiii
K_N_OOO
(
F""; r +
jt '
+
I ,,,iii i
n
I, I
+ 1
+ +
+o
0 POWER key
(U.S.A+, U,S+Military and Canada)
Press to switch power ON and OFF.
O POWER key
(Except for US+A,, U.S.MilRaq/and Canada)
(China : O POWER)
Press tO switch the main power ON and OFF+
O ON/STANDBY key
(Except for U+S.A. UrS+Military and Canada)
Press to switch the power mode between
STANDBY and ON.
O STANDBY indicator
Lights in STANDBY mode,
RC sensor
Receives signals transmitted from the re-
mote control unit+
" OPHONES jack
Use for listening toaudio through headphones
O SPEAKERS keys
Press each key to switch the SPEAKERS A or
SPEAKERS B ON and OFF
Indicators
CLIP INDICATOR :
Lights when the input is clipped during
analog to digital signal conversion, -_
DOLBY DIGITAL :
Lights when Dolby Digital is activated.
DTS :
Lights when the DTS is activated, -_
_MUTE key
Press to mute the audio temporarily. +_
@RC transmitter
Sends signals to the remote contro! unit.
_) Indicator
Lights when signal is input from or output to
the remote control unt,
@ VOLUME control knob
Rotate to adjust the votume,
@S VIDEO input jack
(Except for the VR 2080 or the KRF+V/771D
for the U.S MJiitary dest natioe)
Connect the S VOt_O output iack of an AV
cocnponent
_) VIDEO input jack
Connect the composite video output (RCA)
isck of an AV component.
_AUDIO (L, R) input jacks
Cortnect the audio output (RCA) jacks of an AV
component.
_) CD2/TAPE2 MONITOR indicator
Lights when the C_)2f[ape2 {Monitor) irrDut +s
used. -_._
@ DISPLAY MODE key
Press to switch the dispiay on the muir unit
@INPUT SELECTOR key
Press to switch the input as shown betow
TUNER
CD1
MDfrape!
VIDEO!
VIDEO2
VIDEO3
VIDEO4
AV AUX
PHONO
lUU,,n'1 i .... in J ...._ _-,,_
STANDBY indication
Whle standby indicate,' is indicated, a smatl amount of power is sepptied to the system to back up tire memory In this mode, the system can be
turned ON by remote control.