Filter
Top Products
General setup flow
U Selecting the "Main Menu" icon and opening the "Setup"
menu
19 Selecting the "Macro" icon
[] Selecting the input to be played
D Selection in the "Macro Edit: Custom 1" screen
[] Setting the target component in the "Edit" menu
G Setting the channet, etc.
The macro play function allows you to set the remote to
control several components in succession, After completing
this setup, you can perform a series of operations automati-
cally. Enter the setup codes for the components you want to
control beforehand.
Select the "Main Menu" icon from the fixed segments.
O Select the Select "Stp" icon.
E]
Select the "Macro" icon.
_ Perform operation in the "Custom 1", "Cstom 2" or "Cstom 3" screen.
• E×amp e wheo the
"VCR" is assigned to
"Video1 ".
• Three kinds of macros, "Custom 1", "Custom 2" and "Custom 3"
can be set and registered.
O Select the input to be played with the"_ "or "_ " icon.
Each selection of the icon switches the inputs as follows.
-_ VIDEO1 ._-* VIDEO2 _i_VIDEO3 _ VIDEO4 _--_CD1
MD/Tapel *-
19 Select the "Edit" icon.
• The "Edit" menu e not displayed if none of the connected
components has been assigned to "Video1"
/
El
Perform operation in the "Macro Edit: Custom 1" screen.
O To set the timing of the component selected in step I_ above,
select the icon corresponding to the component.
• Device : Set up the connected devices
• Accessories : To set KENWOOD accessor es
• TV : The icor_ shown in the example on the left opens
the TV setup.
• The displayed menu screen is vat able depending on the Model
Type setup