Filter
Top Products
— 57 —
Hold Error: The protective circuit in the unit activates when the
temperature inside the automatic disc changer exceeds 60°C
(140°F), stopping all operation.E0d
➪ Cool down the unit by opening the windows or turning on
the air conditioner. As the temperature falls below 60°C
(140°F), the disc will start playing again.
NO NAME: Attempted to display DNPS during the CD play having no disc
names preset.
Waiting: Radio text data is being received.
Text for the Sirius tuner source is being received.
Load: Discs are being exchanged in the Disc changer.E57-1
Reading: The unit is reading the data on the disc.E57-2
NO ACCESS: After setting it in the Disc Changer, DNPP was done without
having it been played at least 1 time.E58
IN (Blink): The CD player section is not operating properly.E59
➪ Reinsert the CD. If the CD cannot be ejected or the display
continues to flash even when the CD has been properly
reinserted, please switch off the power and consult your
nearest service center.
Unsupported File:
A MP3/WMA is played with a format that this unit can't
support.E63
➪ ----
Protected File: A copy-protected file is played.E64
➪ ----
Can’t Download/ Download Error:
This unit does not work properly for some reason.E65
➪ Press the reset button to download it again. If this error is
still displayed, consult a local Kenwood dealer.
No Display File:
No file that can be downloaded is contained in the CD-
ROM.E66
➪ Make sure that a files created with referring to
<http://www.kenwoodusa.com/register/oel_software.jsp>
is contained in the CD-ROM.
Do not delete the extension (.kbm/.KBM) created when
the file was created.
Picture downloading was performed with the <CD Read
Setting> (page 45) set to "CD READ:2".
➪ Change the setting to "CD READ:1".
Incorrect File: The file selected to be downloaded has a format that this unit
cannot read.E67
➪ Recreate the file.
Writing Error: Writing failed while the file was downloaded.E68
➪ Try the downloading again
.
KDC-X969_U.S_r4.pg 02.12.13 4:45 PM Page 57