Kenwood KDC-MP922 Stereo Receiver User Manual


 
Putting the channel in the memory.
1 Select the preset band
Press the [FM] button.
2 Select the channel to put in the memory
Press the [4] or [¢] button.
3 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "[1]" "[6]" are displayed above
the [1] [6] buttons.
Refer to <Notes on Multi-function Key System> (page 8).
4 Put the channel in the memory
Press the desired [1] — [6] button for at least 2 seconds.
The preset number display blinks 1 time.
Channel Preset Memory
Press the [FM] button.
Each time the button is pressed the preset band switches
between the SR1, SR2, SR3 and SR4.
Selecting the Preset Band
Canceling Direct Access Tuning
Press the [DIRECT] button on the remote.
If you make no button operation for 10 seconds, the Direct Access
Tuning mode is automatically canceled.
•You can set up to Channel number 223.
If there is no signal in the input Channel, "NO CHANNEL" appears.
If you cannot receive any signal in the input Channel due to a bad
condition on radio wave or another problem, "Acquiring Signal"
appears.
Entering the channel and tuning.
1 Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote.
2 Enter the channel
Press the number buttons.
3 Do Channel Search
Press the [4] or [¢] button.
Direct Access Tuning (Function of remote)
Selecting the channel and category you want to receive.
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "CH+"/ "CH–"/ "CS+"/ "CS–" is
displayed above the [2] [5] button.
2 Select the item for adjustment
Press the desired [2] [5] button.
Each time the button is pressed the items that can be adjusted
switch as shown below.
Adjustment Item Button Display
Search down in category [2] "CS–"
Search up in category [3] "CS+"
Search down for channel
in selected category
[4] "CH–"
Search up for channel
in selected category
[5] "CH+"
You cannot operate this unit until all the Category information is
acquired.
Channel/Category Search
Sirius tuner control features
— 38 —
English
KDC-X969_U.S_r4.pg 02.12.13 4:44 PM Page 38